Double Glazing Lock Repairs
The use of high-quality locks on your windows and doors helps to prevent burglars from getting into your home. They don't usually like to break glass or try to squeeze through open windows.
Some double glazing owners, however, have experienced problems with their door or window lock after the installation. Fortunately, these issues are usually fixable and don't require to buy new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC window lock or door lock if it's damaged or broken. They can fix the hinges, striker plates and locks on your double glazing. They can also move the cylinder to fix any misalignment which could be causing your handle to operate correctly.
The mechanism may be locked when the key is inserted into the lock, but it does not turn or be difficult to insert. The dirt or grease could be trapped in the mechanism. If this is the case, it might be possible to clean the lock and then lubricate it. Use a dry lubricant like graphite or Teflon and not oil, as oil can attract dirt and cause it to stick to the mechanism's inside. After you have lubricated the lock, you should insert the key and try to turn it. The lubricant will work its way through the mechanism and the lock should be able turn easily.
A malfunctioning lock could be caused by loose screws inside the lock mechanism. They can loosen and break off or fall out completely and stop the lock from working properly. The screws can be tightened by using a screwdriver, but be cautious not to tighten them too much. This could damage the internal components.
A damaged lock can be dangerous for your family and you. This is especially the case if you have children. It can be easy for them to open the door without your knowledge and allow them access to your home. If you're worried about the possibility that this could occur, a licensed professional locksmith can assist you re-secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement doors and windows are not necessary.
Handles that are broken or faulty
Many double glazed windows feature a multi-point lock as a part of the overall security package. This is a great choice for those who are concerned about opportunistic thieves looking for ways to gain access to your home. It's also worth asking your installer about anti-lift locks which can be put in with the locks that are already in place to ensure that your window is locked in the closed position.
It's not uncommon for the handle locks to become damaged or fail. They are the first part of your window to be forced open by criminals intent on breaking into. The good news is that this is among the easiest parts to repair.
Modern uPVC handles as well as aluminium handles are equipped with the multi-point locking mechanism referred to as Espagnolette, which is designed to prevent forced entry. This security upgrade is often available as an extra on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional extra on new double glazed window installations.
When a handle is faulty it is essential to get the handle repaired as soon as is possible. A damaged handle could prevent the window from double glazed repairs near me closing properly and permit drafts to enter. It could also be a weakness that thieves who are opportunistic could take advantage of and put the belongings of your family and you at risk.
To repair the broken mechanism, first access the window frame and remove the damaged handle. The gearbox that opens the handle is located and the model is identified so a replacement can be sourced which matches the profile of the internal window frame mechanisms.
Once the mechanism has been replaced the handle can then be re-affixed with the original screws - however, we generally recommend replacing them with more long screws as this will give the most secure fit. The final step is to seal the handle using an opaque sealant. double glazing near me This will help protect it from further deterioration. Once you've completed this step your window will be functional again, and at a fraction of the cost of replacing it.
Hinges that are broken or Faulty
If your windows aren't shut properly, draughts could be able to enter, your home's security barriers will weaken, and there is an increased chance of damp or water damage. Window hinges that fail or fail to function properly are a common problem and can be easily repaired.
If your windows made of uPVC won't close or open it's likely that hinges need to be repaired or replaced. Most window companies will require that you purchase an entirely new window unit in order to address this issue, but we can replace the hinges to save you money.
Window hinges can be damaged by repeated use, or they are weakened double glazed window suppliers near me over time by corrosion. If you have a broken window hinge, it's essential to take steps to prevent further damage. This means not causing the window to open or close.
Knowing the type of hinge you have will help you locate the right parts to repair it. The most common types of window hinges are Maco, Mila, Roto and a variety of other brands. It's best to consult a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.
A damaged hinge can be a major issue for your uPVC windows and doors. They can be an important source of noise, and they can also double glazed window repairs near me allow water to infiltrate your windows.
Check that the pin barrels on both sides of the hinge are aligned. If it's not then tap the head pin with the hammer to create a small bend in the hinge barrel. This will hold the pin in position. A friend can help you hold the doors while you take off hinge screws and hinges. Replace the hinges using those that are of the same size, and then attach the screws using glue. After the glue is drying, put a secure hold on the hinges using weights or clamps.
After you have repaired your hinges, you can reinstall the door. You can also attach the handle. It is recommended to replace the screws with the same length of wood dowels as the screw that was originally used so that they align with each one.
Glass that is Broken or damaged
While uPVC windows do a great job of keeping the cold out and heat in, they may become damaged over time. This can include broken or damaged glass and faulty locks. This is a problem that can be costly should it be left unattended. It can also detract from the appearance of your home and could lead to a loss of insulation, which is why it is essential to fix any damage as quickly as you can.
You can repair the crack in your glass yourself if you have the proper tools and techniques. First, make sure the surrounding area around the glass is free of debris to ensure that any shards do not harm anyone and aren't a trip hazard. Then, remove any broken glass pieces and dispose of them in the appropriate manner. Apply masking tape across the entire area. This will prevent shards of glass from sticking to your skin and scattering when you move them. Pre-fitting the glass pane before applying glue is a good idea when you have windows with two panes. This will ensure you have enough space to complete your project.
Use a dry, clean cloth to clean the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application here and curing that can differ from product to product. Based on the direction of the crack, you may need to secure the glass during the curing process with lightweight clamps designed to hold delicate materials.
After the adhesive has completely cured, carefully install the glass inside the window frame. Make sure that it is in line with the frame edge and that there aren't gaps between the glass sash and frame. Be careful to avoid flexing the window when it's being put back in place, as this can weaken the seal and cause water infiltration and condensation.
If you have a glass door that's broken completely or has bigger cracks, call an experienced professional glazier such as O'Brien(r) to organise a replacement. Leaving broken glass unattended can pose a safety risk for pets and children It's therefore essential to act quickly.